Just Right!
TMX-200225
2021 ThingsMatrix Inc. Confidential Information. All Rights Reserved.
When motion is detected, it wakes up after sleeping for 1 hour (default value).
During sleep, the accelerometer (G-sensor) is turned off, and the device cannot be
woken up by vibration and/or motion.
When motionless, it wakes up after 12 hours of sleep (the default value). During
sleep, the accelerometer (G-sensor) enters the low power consumption mode and
continues to detect vibration. In this mode, the device can be woken up by vibration
and/or motion.
After being woken up by vibration/motion, if no continuous vibration/motion is
detected for more than 4 seconds, the device will go back to sleep.
The priority of Motion/Static Mode is higher than the other two working modes
(Clock Mode and Refresh Mode). The user can select a working mode according to
the specific use case (refer to
Table 3
).
3.6.2 Configuration Example
If the device needs to report data once every 5 minutes while in motion and once
every 10 minutes otherwise, the user can turn on Motion Mode and set the following
parameters:
3.7 Schedule Mode
3.7.1 Introduction
Schedule Mode can be used when the user requires the device to wake up and
report data at one or more preset wake-up times (up to 4).
