THSEU101 User Manual
Rev. 1.00
www.thinesolutions.com |© THine Solutions, Inc. All rights reserved | Page 13 / 36
Pin Name
SW# IC Pin # Description
Default
GPIO0
8
7
GPIO[0]
SW = 0 (Off) = Pull down on THCV241A GPIO pin
SW = 1 (On) = Pull up on THCV241A GPIO pin
SW = 0
(Off)
THCV241A 2-wire Address
To change the 2-wire device address find the resistors, R919 an R920 and reference the table below.
Pin Name
Pin #
Description
Default
AIN
27
Select Slave Address
R919 (DNP) / R920 (Populated) = 0 : 2wire serial address = 7'b000_1011
R919 (Populated) / R919 (DNP) = 1 : 2wire serial address = 7'b011_0100
0:
7'b000_1011
