Thermopatch Thermo-Seal Y151 Series, Руководство оператора

Страница: 22 / 43

22
5.1.1 Normal Label Tag Marking
Label Tags are sealed directly onto the garment or textile item. Placement of the
Label Tag should be done in the correct position for the garment or textile item.
5.1.2 Thick, Dirty Or Damp Garments and Textile Items
Label Tags are sealed upon thick, dirty or damp garments and textile items
in the same manner as described in section 5.1.1 Normal Label Tag Marking.
However, thick, dirty or damp garments and textile items require more heat
to securely adhere the Label Tag to the garment or textile item. Therefore, a
Sealing Time of 4.8 seconds “Heavy” is used to correctly seal the Label Tag
to the garment or textile item. The machine operator can change from Normal
seal time to Heavy seal time by using the F3 Thermo-Seal function key .
5.1.3 Sensitive Garments Or Textile Items
Label Tags that cannot be sealed directly on sensitive garments or textile
items can be sealed indirectly using the “Extra Length” option. The Extra
Length option can be activated by using the F4 Thermo-Seal function key .
Attention! Thermopatch cannot take any responsibility for any damages to
garments or textile items that occur by the use of this machine.
The Extra Length Label Tag has the desired code printed onto the Label Tag. The
Label Tag is positioned in front of the Heater Element and ready to be sealed.
Pass the long Label Tag through the top buttonhole of the garment or opening in
a textile item. The printed code must be visible and the end of the long
Label Tape must be folded between the Sealing Platen and fixed tape.
5.1.4 The Use Of Flags On Sensitive Garments
There is an alternative indirect Label Tag marking method. The alternative
method uses “ flags .” The Label Tag with desired code is printed, cut and sealed
onto the flag. The flag is then fastened to a button on the garment, in a manner
in which the flag cannot come loose.
Attention: To ensure proper sealing of the Label Tag ends, be sure that both
ends of the Label Tag are parallel to each other. To complete the seal, hold the
Label Tag at the garment or textile item. CAUTION! Be sure to keep your
fingers clear of the Sealing Platen.
5.2 Interrupting The Sealing Cycle
At any point in the process of printing, cutting or sealing the machine operator
can interrupt the Sealing Cycle. Depressing the Esc key will exit the process
cycle allowing the machine operator to initiate any necessary changes or
activation of sub-routes.