Thermopatch Thermo-Seal Y151 Series, Руководство оператора

Страница: 25 / 43

25
Failure Possible Causes Solution
Obstruc Ɵ on in Tape Guide Clean Tape Guide
Worn Spindle Drive Ring Replace, see sec Ɵ on 7.6
Defec Ɵ ve Stepper Motor Replace
Ink build-up on Rubber Platen
Ink build-up on Heater Shield
Tex
Ɵ le is temperature sensi Ɵ ve or
tex Ɵ le care symbols disregarded
Mark with Extra Long Label
Tag or with Label Flag
Time se ƫ ng too long Decrease Ɵ me
Temperature too high Correct temperature
High mechanical load during washing
or cleaning Replace Rubber Sealing
Platen
Temperature too low Correct temperature
Sealing pressure too low Correct pressure
Sealing Ɵ me too short Correct Ɵ me
Tex Ɵ le is
discolored during
sealing
Labels become
loose on le
Ō side
Incorrect
Character Spacing
on Label Tape
Marks on garment
or tex
Ɵ le item
Clean or replace