Thermopatch NL-15 R/SQR MAMMOTH, Руководство пользователя

Страница: 16 / 39

thermopatch.com
16
A B
7. Assembly and installation
7.1 Assembly
To work seamlessly with the NL-15 R / SQR, it is very important that the machine can dis-
pose of supply of clean, dry air. The water condenser is an additional safety measure. Pro-
vide pressure of 4-6 bar from the compressor or its own air supply.
Attach a tube with a diameter of 6 mm at the compressor or own air supply and the air reg-
ulator of the NL-15 R / SQR (Image A).
7.2 Installation
Upon delivery, the NL-15 R / SQR is fastened with straps to a pallet. The arm of the ma-
chine is locked with a bolt (M12).
• Lift the machine out of the box holding it by this bolt and the handle.
• Put the machine on a work table near an earthed socket.
• Remove the M12 bolt.
• Make sure that there is enough free space around the machine.
• Make sure that there are no items near the machine that are sensitive to heat radiation.
If you have to move the machine at a later time, it is recommended to pack it in a similar
way. Let the press cool down before you pack it.
7.3 Electrical requirements
The NL-15 R / SQR should be connected to the electricity grid (230 V alternating current).
Use the machine’s power cable to provide current. The NL-5 R / SQR is an earthed machine
and has been provided with two fuses of 4.0 amps, see image B.