Thermopatch NL-15 R/SQR MAMMOTH, Руководство пользователя

Страница: 36 / 39

thermopatch.com
36
10. Faults
If a problem should occur, please consult the list below; if the problem you are facing cannot
be solved by yourselves contact your supplier.
Fault Possible cause
Solutions
Heating plate does not
heat up.
1. ON/OFF switch is not set to ON
2. Machine is not connected to the
electricity grid
3. Electronics not connected to
the
machine
4. Temperature sensor defective
5. Electronics wrongly set
6. Electronics defective
7. Heating element defective
Check
Check
Check
Check
Check
Check
Check and replace when
necessary
Heating plate is too hot
or too cold.
1. Check the temperature settings Correct
Machine opens too soon 1. Check the sealing time settings Correct
Machine does not close 1. Pressure or temperature is not
correct
2. Swivel arm is not in final posi -
tion
3. Contact switch is not correctly
positioned
Check
Bring swivelling arm
back to end position
Correct
Insufficient adhesion
of patches, label tapes,
labels or fixing of the
transfers
1. Press time too short
2. Incorrect pressure
3. Heating plate too cold
4. Press pad of lower plate worn
out
5. Teflon below heating plate dirty
or
worn
Increase time settings
by 2 seconds and check
results
Set pressure correctly
with knob and check
results
Check temperature
Replace
Clean with soft cloth or
replace
The colour of the textile
penetrates the transfer
1. Temperature set too high
2. Pressure set too high
3. Sealing time set too long Follow heat sealing in-
structions carefully