Thermoline Scientific Equipment TCH-150, Руководство по эксплуатации

Страница: 8 / 22

P a g e | 7
18-5-10 TCH-150 & 460
Photo 1, Front view. Photo 2, Left side view.
•
Before turning on the water supply or the power, make sure that the drain valve is closed.
The drain valve is located in the area behind the hinged cover below the door. Open the
hinged cover to gain access to the drain valve (see photo 3 below). The drain valve is
shown in the closed position. Note: Prior to leaving the factory, the water pressure regulator
has been left fully open as it should be when the water is supplied from a gravity fed bottle.
If a town water supply is used it may be necessary to adjust the water pressure regulator.
See the section in “maintenance” regarding adjustment of the pressure regulator.
Photo 3: Access to drain valve.