ThermoFLUX EcoLogic 25, Руководство пользователя

Страница: 59 / 72

59
After the stabilization phase is over, the boiler switches to normal operation according to the default
parameters and system settings.
Boiler shutdown
– switch off
To turn off the boiler press the SET button. The display shows BOILER OFF EXTINGUISH (KESSEL
NACHLAUF)
Suction fan goes maximum power and pellet dispenser stops operating.
The duration of the shutdown is determined by the system parameters and lasts until the temperature
in the combustion chamber drops below 200 ° C
Auto-adjusting power operation and extinguishing
In the work phase the boiler itself adjusts power operation at the request of the heating system or the
water temperature in the system.
Boiler control is programmed so that, when the boiler temperature reaches the default value, it
automatically starts to decrease the power output.
If the temperature exceeds the temperature adjusted by user up to +5 ° C , boiler automatically turns
off and on the display shows
PAUSE .
After the boiler temperature drops below the temperature adjusted by user, it automatically restarts the
ignition phase and continues working.
Automatic cleaning
During operation the boiler has a timer which, after a certain time of work, interrupts the dosing, shuts
down the boiler and starts the motors for cleaning the grate in the combustion chamber and the motor
for heat exchangers. The cleaning interval depends on the strength of the work and can be more
frequent or shorter.
The process is fully automated, does not require user's work.
When the cleaning phase is complete, the boiler will re-ignite and continue working.
Re-ignition
In order for the boiler to start work again, either automatically or manually, the cooling cycle conditions
must be completed.