ThermoFLUX EcoLogic 25, Руководство пользователя

Страница: 12 / 72

12
Pellets that can be used in boilers
The boiler is designed exclusively for burning wood pellets with a
diameter of 6 mm and a length of 10-30 mm.
What is pellet
Pellet is obtained from wood, if it is
possible, from the core of the trunk with
the lowest proportion of bark. The bark
contains the most moisture, dust and
impurities that wood gets during growth,
therefore has a lower caloric value than
the core, and another problem is that it
leaves the sediment when burning. Ideal
wood for pellet production is one that
does not burn too long or too short and
creates a long-lasting glow. Pellets are
made from sawdust waste (typically in a
ratio of 20-40% softwood + 60-80%
hardwood), in special machine under
high pressure which leads to thickening.
It is not allowed to use any additives or
glue during the pellet. production The
pellet contains a minimal amount of
moisture and ash, and has a maximum
energy value for the type of wood from
which they are produced.
Recommended wood pellets and standards
Pellets quality arises from Standard pellets C1 to EN 303-5: 2012 Table 7; Water content
less than 12% according to DIN 51731 - HP 5, DINplus certification program and ÖNORM
M 7135 - HP 1 or EN PLUS - UNI EN 14961 - 2 (UNI EN ISO 17225-2) class A1 or A2, 6
mm diameter, length 10-30 mm.
Particular attention should be paid to the quality of wood pellets. Low-
grade pellets can cause malfunction of the boiler.