Thermo Scientific STD5000, Руководство пользователя

Страница: 44 / 44

Specifications
C-8 STD5000 & STD6000 User Guide Thermo Fisher Scientific
Instructions Specific to Hazardous Area Installations
(Reference European ATEX Directive 94/9/EC, Annex II, 1.0.6.)
The following instructions apply to equipment covered by certificate
number ITS09ATEX26170X for the STD5000 and ITS09ATEX16128X
for the STD6000.
1. The equipment may be used in a hazardous area with flammable gases
and vapors with apparatus groups IIC, IIB, and IIA and with
temperature classes T1, T2, T3, and T4 for the STD5000 and T1, T2,
T3, T4, and T5 for the STD6000.
STD5000 Category 1G zone 0
STD6000 Category 2G zone 1
2. The equipment may be used in the presence of combustible dust, the
STD5000 being in zone 20 and the STD6000 in zone 21.
3. The equipment is certified for use in ambient temperatures in the
following range and should not be used outside this range:
-20°C to +60°C for the STD5000
-20°C to +50°C for the STD6000
4. Installation shall be carried out in accordance with the applicable code
of practice by suitably trained personnel.
5. The equipment is not intended to be repaired by the user. Repair of
this equipment shall be carried out by the manufacturer in accordance
with the applicable code of practice.
6. If the equipment is likely to come into contact with aggressive
substances and environments or excessive external stresses, e.g.
vibration or heat, then it is the responsibility of the user to take suitable
precautions that prevent it from being adversely affected, thus ensuring
that the type of protection is not compromised.
Aggressive Substances - e.g. acidic liquids or gases that may attack
metals or solvents that may affect polymeric materials.
Suitable Precautions - e.g. regular checks as part of routine
inspections or establishing from the material’s data sheet that it is
resistant to specific chemicals.