SlideMate Integration Options
SlideMate Operator Guide, Revision 1.20
Page 7
1.5. Route the ribbon through SlideMate unit as shown in the figure below. In the main setup screen use
the Load function accessed by the right button (see Figure 9). This allows the ribbon take-up reel to
be rotated in the take-up direction by hand.
Figure 5 - Correct Ribbon Routing Procedure
Please note the direction the ribbon feeds off the roll. Figure 5 shows the correct feed direction.
Figure 6 - Incorrect Ribbon Routing Procedure
Using a ribbon other than the one recommended, may cause
irreversible damage to the unit.
Please see Appendix B for media part number.