Thermo Scientific Precision GP 02, Руководство пользователя

Страница: 57 / 68

Use the arrow keys to highlight the desired setting. Press
to make changes.
O I
O I
CAL
!
°C °C
These icons represent the timer. The top one is used to set the amount of time required, in hours and
minutes, before the bath will start. The bottom is used to set how long the bath will run, in hours and
minutes, before shutting down. When the bath starts/stops the alarm, if enabled, will beep.
Once the desired timer mode is selected press, and hold, the arrow keys to change the time. O I
O I
Once the desired value is displayed press
to save the change or
x
to reset the time to
zero. Press to return to the home screen.
The timer can be used to turn the bath on and then,
at a later time, turn the bath off. (Or turn a running
Changing a Setting
Press the soft key below to display the Setting screen.
O I
00:00
x
bath off and then back on.) The bath off time must take into account the start time value. For
example, if you want the bath to start in 60 minutes and then turn it off 30 minutes later, set the
start time to 1:00 and set the off time to 1:30.
Note
You cannot set a start time if the bath is running or set an off time if the bath is not running.
95. °C 0
x
These icons represent the audible alarm status. The top indicates it is enabled, the bottom
indicates disabled. Press
to toggle between enabled/disabled. Use the arrow keys to
highlight another setting or press to return to the home screen.
This icon represents the high temperature alarm. If the reservoir fluid exceeds this temperature
the bath will shut down and, if enabled, the alarm will sound. The controller will also have an
error display,
. See Chapter 6.
Press, and hold, an arrow key to change the
temperature. Once the desired value is displayed
press
to save the change or
x
to
not save the change.
Press to return to the home screen.
4-4 | Precision Thermo Scientific
Chapter 4
| Operation