Thermo Scientific KingFisher Duo Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 84

background image

Thermo Fisher Scientific

Thermo Scientific KingFisher Duo User Manual

21

Chapter 3

Installation

This chapter describes the installation of the KingFisher Duo
instrument.

This section covers the relevant procedures to be carried out on receipt
of the instrument.

Move the packed instrument to its site of operation. To prevent
condensation, the instrument should be left in its protective, antistatic
plastic wrapping until the ambient temperature has been reached.
Unpack the KingFisher Duo instrument and accessories carefully with
the arrows on the transport package pointing upwards. Remove the
instrument from the package and place it on a level surface.

The following notes and instructions are sent with the instrument and
are immediately available when you open the package:

●

Thermo Scientific KingFisher Duo Brief User’s Guide

●

BindIt™ Software installation CD

•

KingFisher Duo User Manual

•

BindIt Software for KingFisher Instruments User Manual

•

Thermo Scientific User Awareness of Symbols

•

Declaration of Conformity

document

Caution

Do not touch or loosen any screws or parts other than those

specifically designated in the instructions. Doing so might cause
misalignment and will void the instrument warranty.

▲

Warning

The KingFisher Duo weighs approximately 16 kg [35 lbs.]

without the transport package and should be lifted with care. It is
recommended that two persons lift the instrument together, taking the
proper precautions to avoid injury.

▲

To lift the instrument, put your fingers under the bottom on either
sides and lift it with your back straight.

What to do upon

delivery

Unpacking the

instrument

«
...
21
22
23
24
25
...
»

Содержание KingFisher Duo





















































































Отзывы:

Нет отзывов

Похожие инструкции для KingFisher Duo

Бренд: ZOLL Страницы: 344

Бренд: ABB Страницы: 9

Бренд: Landoll Страницы: 6

Бренд: ParaBody Страницы: 9

Бренд: ParaBody Страницы: 3

Бренд: MacDon Страницы: 45

Бренд: H&S Страницы: 30

Infield Rascal Pro

Бренд: ABI Attachments Страницы: 8

Бренд: Abicor Binzel Страницы: 84

Бренд: ABI Attachments Страницы: 5

Бренд: abem Страницы: 47

Бренд: Abely Страницы: 5

Бренд: Ace Страницы: 17

Бренд: ACE INSTRUMENTS Страницы: 33

Бренд: ACE INSTRUMENTS Страницы: 2

Бренд: ACE INSTRUMENTS Страницы: 2

Бренд: TapFlo Страницы: 35

Бренд: DANA Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды