Thermo Scientific HM525 NX Operator Guide
7
Symbols
The following symbols and conventions may be used throughout this document and on the instrument:
This symbol is used on the instrument, or in a document, to indicate that instructions
must be followed for safe and correct operation. If this symbol appears on the
instrument, always refer to the operator guide.
This symbol is used on the instrument, or in a document, to indicate that there are
potential biological risks associated with the instrument and / or instrument use.
Always use Good Laboratory Practice.
This symbol indicates that a surface is hot. If this symbol appears on the instrument,
always refer to the operator guide.
Cold surface, if necessary, use gloves
This symbol is shown in the manual and on the instrument to indicate that hand
injuries are possible due to moving parts. Take suitable precautions.
Cutting hazard, sharp edges, watch your fingers.
This symbol is used on the instrument, or in a document, to indicate that irritants or
potentially harmful chemicals are present. Refer to the Material Safety Data Sheets for
the products, and always use Good Laboratory Practice.
This symbol is used to identify the UV disinfection system. Do not open the window
when the disinfection cycle is in process and do not look directly at the UV light.
Separate taking back of electrical and electronic instruments in the countries of the
European Union:
This is to be applied in the countries of the European Union and other European
countries with a separate collecting system within the waste management. This
product, being an electro and/or electronic instrument, must be treated separately
within the waste management process (WEEE).
Manufacturer.
