Thermo Scientific HM525 NX Series Скачать руководство пользователя страница 44

Страница: 44 / 71

Thermo Scientific HM525 NX Operator Guide

Change to ISO Format

•

Press the "ISO" button to toggle between

the full date format and the ISO format.

•

Press "OK" to confirm the setting and to

return to the Main screen.

•

Press the "Back" button three times to exit

back to the Main screen without saving the
changes.

Setting the Time

•

Press the "Menu" button on the Main

screen.

•

The Menu screen will be displayed.

•

Press the "Time" button.

•

The Time screen will be displayed.

Set the Minutes

•

Press the "Minute" button to highlight it.

•

Use the arrow keys to select the desired minute.

Set the Hour

•

Press the "Hour" button to highlight it.

•

Use the arrow keys to select the desired hour.

Set the Time Format

•

Press the "12/24" button to toggle
between the 12 and 24 hour modes.

Note

The 12/24 button is highlighted in yellow if the 12h mode is active.

•

Press "OK" to confirm the setting and to return to the Main screen.

•

Press the "Back" button three times to exit back to the Main screen without saving the changes.

Содержание HM525 NX Series








































































Результаты поиска

Содержание HM525 NX Series

Отзывы:

Похожие инструкции для HM525 NX Series

Бренды по названию

Популярные бренды

Thermo Scientific HM525 NX Series, Руководство оператора

Результаты поиска

Содержание HM525 NX Series

Отзывы:

Похожие инструкции для HM525 NX Series

Бренды по названию

Популярные бренды