Thermo Scientific HM525 NX Series Скачать руководство пользователя страница 31

Страница: 31 / 71

Thermo Scientific HM525 NX Operator Guide

Specimen Setup

Before sectioning can begin, the specimen must be correctly clamped and oriented in the specimen head.
To clamp and orient the specimen:

•

Loosen the specimen chuck release lever and insert the specimen chuck into the jaws of the

specimen head.

1 Specimen Chuck Release Lever

2 Specimen Head Clamping Lever

•

Push down on the specimen chuck release lever again to allow the jaws to grip the chuck.

•

Loosen the specimen head clamping lever to allow adjustment of the specimen parallel to the
cutting edge.

•

Use the specimen chuck release lever to orient the specimen on the x- and y-axes.

Note

The specimen chuck release lever will click into place when the centre position has been reached.

•

Tighten the specimen head clamping lever again.

For further specimen orientation, the specimen chuck can also be rotated by 360° as described below:

•

Loosen the specimen chuck clamping lever slightly.

•

Rotate the chuck as required.

•

Tighten the specimen chuck clamping lever.

To avoid severe damage ensure that the blade does not crash into the specimen.

Содержание HM525 NX Series








































































Результаты поиска

Содержание HM525 NX Series

Отзывы:

Похожие инструкции для HM525 NX Series

Бренды по названию

Популярные бренды

Thermo Scientific HM525 NX Series, Руководство оператора

Результаты поиска

Содержание HM525 NX Series

Отзывы:

Похожие инструкции для HM525 NX Series

Бренды по названию

Популярные бренды