Thermo Scientific HM525 NX Series Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 71

background image

Thermo Scientific HM525 NX Operator Guide

36

Set the Specimen Head Position

•

Move the Specimen Head to the desired position and press the “Position” button on the Main

screen for about 3 seconds.

•

The colour will change to yellow, showing that the position has been saved and the required
position is stored.

•

When a new block is inserted into the Specimen Head, press the “Position” button for 1 second
and the Specimen Head will return to the set position.

•

To save a new position, again align the Specimen Head to the desired position and press the
“Position” button for 3 seconds. The new position will be stored.

•

To reset the position, hold down the position button for approx 6 seconds.

Backward fast movement of specimen head (1mm/sec) button

Press the button for 1 sec to move the Specimen Head backwards a short distance.
After about 2 sec the head moves back automatically.
Press the button again to stop the movement immediately.

Slow forward movement of specimen head (0.5mm/sec) button

Press the button to move the Specimen Head forward.
The head will only move while the button is pressed.
It will stop immediately if not pressed.

Fast forward movement of specimen head (1mm/sec) button

Press the button to move the Specimen Head fast forward.
The head will only move while the button is pressed.
It will stop immediately if not pressed.

«
...
34
35
36
37
38
...
»

Содержание HM525 NX Series








































































Отзывы:

Нет отзывов

Похожие инструкции для HM525 NX Series

Бренд: Parata Страницы: 40

Бренд: DARAY Страницы: 28

Бренд: MacDon Страницы: 88

Бренд: Jiffy Страницы: 15

Бренд: Handler Страницы: 25

Бренд: Keithley Страницы: 79

Бренд: Kayakpro Страницы: 17

Бренд: Yoshitake Страницы: 11

Бренд: Olsen Страницы: 58

Бренд: M-Audio Страницы: 48

Бренд: M-Audio Страницы: 19

Бренд: M-Audio Страницы: 17

Бренд: M-Audio Страницы: 18

Бренд: M-Audio Страницы: 12

Бренд: M-Audio Страницы: 20

Бренд: Y.I.C. TECHNOLOGIES Страницы: 6

Бренд: Twiflex Страницы: 5

Бренд: Interacoustics Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды