Thermo Scientific AutoPILOT PRO, Руководство пользователя

Страница: 86 / 191

Thermo Fisher Scientific AutoPILOT PRO Flow Computer User Guide 7-1
Chapter 7
Radio Options
Warning
Ensure power is off and the area is non-hazardous before making
any connections.

Warning
Use wires suitable for at least 90°C.

Warning
Installation must be carried out in accordance with local site
requirements and regulations.

Note
It is assumed that the ground stud at the bottom of the flow
computer enclosure has been connected to earth ground. See step 2 in the
wiring section of Chapter 3.

Tip Go to Appendix A for radio part numbers and kit information.

An optional MDS 9810 series radio manufactured by GE MDS and
labeled with the UL Mark can be installed in the flow computer enclosure
for United States installations. For Canadian installations, an optional
MDS 9810 series radio manufactured by GE MDS and labeled with the
CSA Mark can be installed in the flow computer enclosure. The radio is
mounted to the equipment panel using a standard bracket supplied by the
manufacturer with standoffs. The host communication port (TB16) on the
main board is not available for customer use when connected to the MDS
radio option.
Warning
Before installing the MDS 9810 series radio in the flow
computer, ensure the radio has the UL recognized component label for
United States installations. For Canadian installations, ensure the MDS
9810 series radio has the CSA label. If the flow computer is in a hazardous
location, do not install the radio if it does not have the appropriate UL or
CSA recognized label.

MDS Radio
Option