Thermo Scientific ALPS 3000, Руководство пользователя

Страница: 7 / 24

4
Operating Environment & Footprint
4. Operating Environment & Footprint
The ALPS 3000 should be operated in an environment with a temperature range of 15° C - 40° C and a non-
condensing relative humidity range of 10% - 80%.
The unit should be kept out of drafts and air currents as they will have an adverse effect on the temperature
stability of the sealing plate. Since the ALPS 3000 will not seal if the temperature is not at the set
temperature, if the sealing plate is cooled by drafts then the time between cycles may be increased.
The machine should be mounted on a sturdy bench to avoid any movement during operation. When locating
the machine there should be enough space allowed for the shuttle to move out without hitting anything
or anyone. The reduced weight compared to the previous model does make the ALPS 3000 much easier to
move into a suitable position.
Note:
Allow 170mm at the front of the unit for the plate carrier to open and 100mm at the back and top for
the seal roll.
The ALPS 3000
™
should be operated in an environment with a temperature range of 15
o
C - 40
o
C and a non-
condensing relative humidity range of 10% - 80%.
The unit should be kept out of draughts and air currents as they will have an adverse effect on the
temperature stability of the sealing plate. Since the ALPS 3000
™
will not seal if the temperature is not
at the set temperature, if the sealing plate is cooled by draughts then the time between cycles may be
increased.
The machine should be mounted on a sturdy bench to avoid any movement during operation. When locating
the machine there should be enough space allowed for the shuttle to move out without hitting anything or
anyone. The reduced weight compared to the previous model does make the ALPS 3000
™
much easier to
move into a suitable position.
Note:
Allow 170mm at the front of the unit for the plate carrier to open and 100mm at the back and top for
the seal roll.
5. Operating Environment & Footprint
6