Thermo Scientific ALPS 3000, Руководство пользователя

Страница: 5 / 24

2
Health and Safety Notes
2. Health and Safety Notes
It is important that the ALPS 3000 is installed and operated in such a way that all applicable Health and
Safety requirements are met. It is the user’s responsibility to ensure that all relevant Health and Safety
regulations are identified and complied with. Failure to do so, may result in damage to the equipment and
could cause personal injury. In particular, the user should study the contents of this guide carefully before
handling or operating this equipment.
Under no circumstances will the supplier of this equipment be liable for any incidental, consequential or
any special damages of any kind whatsoever, including but not limited to lost profits arising from, or in
anyway connected with the use of this equipment or this instruction manual.
WARNING SYMBOLS Used In Accordance With IEC 417
RISK OF ELECTRIC SHOCK
WARNING!
Refer to accompanying documentation.
HOT SURFACE/HOT AREA
This instrument is fitted with an
internal heater with a maximum
temperature of 200° C when in use
PROTECTIVE CONDUCTOR TERMINAL
MAINS SWITCH SYMBOLS I - O
I = ON O = OFF
Environmental Requirements
Temperature Range Operating 15° C to 40° C
Storage 0° C to 40° C
Relative Humidity: Operating 10% to 80% Non-condensing
Storage 10% to 80% Non-condensing