TK 56579-11-IS-EN (Rev. A, 10/20)
©2020 Trane Technologies
5
N
No
otte
e:: The charge controller for the 30W panel is located under the panel. If your controller has
LEDs, verify solar panel operation before securing panel onto unit. If panel is installed,
follow test procedure for non-LED controllers. See
“Solar Panel Test Procedures,” p. 11
.
2. Secure solar panel to frame with supplied rivets.
Figure 5.
Secure panel with rivets as shown.
RCS1500-1
3. Route harness down inside the unit, under the fuel filter and over to the starter as shown.
IIm
mp
po
orrtta
an
ntt:: DO NOT attach electrical harnesses to copper tubing, exhaust components or
fuel lines.
Figure 6. Battery harness routing shown.
RCS1490