TK 56433-5-MM-EN
53
W
WA
AR
RN
NIIN
NG
G
R
Riisskk o
off IIn
njju
urry
y!!
D
Do
o n
no
ott p
pu
utt ffiin
ng
ge
errss b
be
ettw
we
ee
en
n tth
he
e b
be
elltt a
an
nd
d tth
he
e
tte
en
nssiio
on
ne
err p
pu
ulllle
ey
y..
2. Slide the belt from the tensioner pulley by hand in
the direction shown below.
Figure 55.
Remove Belt from Tensioner Pulley
3. Slowly release the downward pressure on the
wrench to remove it from the tensioner bolt. The
wrench will rise above the horizontal starting
position under the force of the spring.
4. Loosen (or remove) the mounting screws for the
upper blower condenser spinning enough to allow
the condenser spinning to be moved away from the
upper blower and the belt to be passed between the
upper blower and its condenser spinning.
5. Remove the old belt.
6. Slide the new belt between the upper blower and its
condenser spinning and install the new belt on the
pulleys in stages as shown below, and to tighten
the mounting screws for the upper blower
condenser spinning.
Figure 56.
Stage 1
Figure 57.
Stage 2
Figure 58.
Stage 3
7. Ensure that the new belt is fitted correctly into the
grooves on all pulleys except the tensioner pulley
prior to beginning next step.
8. Slowly pull down on the tensioner bolt with a 17
mm socket wrench and slide the new belt onto the
tensioner pulley until it is correctly fitted into the
grooves of the pulley.
9. Slowly release the downward pressure on the
wrench to remove it from the tensioner bolt. The
belt should be aligned as shown below.
