Thermcraft XST-2-0-12-1V1-E28, Инструкция по эксплуатации, Страница: 223 / 260

Installation and Operation Handbook Configuration
6.2 Selecting a Configuration Parameter
The configuration parameters are arranged in lists as shown in the navigation diagram in
Figure 6.5.
To step through the list headers , press the Page button.
To step through the parameters within a particular list press the Scroll button.
When you reach the end of the list you will return to the list header.
You can return directly to the list header at any time by pressing the Page button.
6.2.1 Parameter names
Each box in the navigation diagram shows the display for a particular parameter. The upper readout shows the
name of the parameter and the lower readout its value. For a definition of each parameter, see the Configuration
Parameter Tables at the end of this chapter. To change the value of a selected parameter, use the and
buttons.
The navigation diagram shows all the lists headers and parameters that can, potentially, be present in the
controller. In practice, those actually present will vary according to the particular configuration choices you make.
6.3 Changing the Passwords
There are TWO passwords. These are stored in the Password configuration list and can be selected and changed
in the same manner as any other configuration parameter.
The password names are:
‘
ACC.P
’ which protects access to Full level and Edit level
‘
cnF.P
’
which protects access to Configuration level.
6.4 Leaving Configuration Level
To leave the Configuration level and return to Operator level Press until the ‘
Exit
’ display appears.
Alternatively, pressing and together will take you directly to the ‘
Exit
’ display.
Use or to select ‘YES’. After a two-second delay, the display will
blank then revert to the Home display in Operator level.
Exit
no
HA025041 issue 12 Aug 14 6-3