Service Manual for the Thermador Professional Series Rangetop, Model PCG366G
58300000151625_ARA_EN_B
Page 4 of 34
1.4 Recommended Tools and Supplies
The following tools and supplies are recommended to use when
servicing this appliance:
Driver sizes: T-10, T-20, T-25, T-30
¼ inch nut driver or ¼ inch socket wrench / ratchet
Wrench sizes: ½ inch, 5/16 inch, 11/32 inch open end
Socket wrench / ratchet 11/32 inch
Adjustable wrench
Pipe wrench
Precision screwdriver with high-strength blade, 1/8" [3.0mm] wide,
.020" [0.50mm] thickness tip
Flat blade screwdrivers: large, small
Swivel head driver with a 11/32 inch, deep well socket
Slip joint pliers
Small needle nose pliers
Hook or non-straight hex key (Allen wrench)
Protective gloves
Gas leak test equipment
Pipe sealant
1.5 Important Safety Information
Before starting to service an appliance, familiarize yourself with all
safety information and precautions contained in this manual.
1.5.1 Safety Symbols Used In This Manual
This symbol alerts you to dangers that may result in bodily injury or
death.
Caution
This symbol alerts you to actions that may result in damage to the
product, or property.
1.5.2 Safety Precautions to Know Prior to Servicing
Before You Start Servicing the Appliance
Before disassembly, removal or installation of any component, do the
following:
■ Turn off electrical power by removing the power cord from the
electrical outlet, and putting the circuit breaker in the OFF position
(or removing the fuse)
■ Turn off the gas supply to the appliance
■ Make sure grates and burner assemblies are cool before
removing them
