Service Manual for the Thermador Professional Series Rangetop, Model PCG366G
58300000151625_ARA_EN_B
Page 15 of 34
5. While lifting the brass burner base, carefully press the locking tab
on the female terminal of the igniter wire, and gently pull to detach
from the electrode (see Figure 12 and Figure 13).
Figure 12: Igniter Wire Attached to Electrode
Figure 13: Igniter Wire Locking Tab
6. If the electrode needs replacing, remove and retain the small T-10
screw to detach it from the brass burner base. If not, leave it
attached to the brass burner base.
7. Remove and retain the T-30 screw holding the cast iron pedestal
burner to the maintop.
8. Remove the pedestal burner with the Venturi tube still attached to
it, while gently pulling the ignition wire through (see Figure 14).
-OR-
Alternatively, you can first lift the Venturi tube out from the
pedestal burner, before removing the pedestal burner from the
maintop.
Figure 14: Pedestal Burner with Venturi Tube
Press tab
to detach
from
electrode
