Themis NanoPAK, Руководство пользователя

Страница: 148 / 156

C-2
Themis Computer
NanoPAK
®
User Manual Version 1.0
C.2 Packaging Components
The packaging components illustrated in this chapter may not exactly match the
original packaging components due to the number and configuration of equipment
originally shipped. However, they will comprise a packaging box, bottom and top
perimeter crush resistant foam pieces, a foam piece with a form-fitting cutout, and a
protective envelope for the equipment.
C.3 Instructions for Repackaging
Re-assemble the packaging material about the equipment in accordance with the fol-
lowing instructions (see
Figure C-1 ):
1. Inspect the original packaging materials for serviceability.
2. Place the bottom crush-resistant layer into the shipping box, making sure the
corners of the foam fit snugly into the corners of the box.
3. Place the cutout layer into the box.
4. Place the wrapped (in the protective bag) NanoPAK
®
into the cutout layer.
5. Place the remaining top layer directly on top of the wrapped NanoPAK
®
unit.
6. Make sure all components of the box are firmly in place, pressing down on
the surface area of the foam to insure proper seating of the material.
7. Seal the top of the box with strong packaging tape, wrapping the tape com-
pletely around the box, both lengthwise, and crosswise.
8. Prepare for shipment in accordance with the instructions received from The-
mis Computer.
The order of assembly when repackaging the NanoPAK
®
for shipment as shown in
Note: Please contact Themis if new packaging material, or shipping instructions
are required. You can reach Themis at 1 (510) 252-0870 Mon–Fri, 8am–5pm PST,
or by Email to support@themis.com.