Themis NanoPAK, Руководство пользователя

Страница: 132 / 156

NanoPAK
®
User Manual Version 1.0
A-16
Themis Computer
Table A-7. Battery/LED Jumper Settings
Name Description
Factory
Default
Setting
JP1 This jumper is used to disconnect the battery on the LED/Battery
board from any load. When the product is put on the shelf, this
jumper should be removed JP1:
NOT INSTALLED
JP4,JP
5,J6 This combination of jumpers and connector is used to set the
Microcontroller in programming mode or operational mode.
For operational mode:
Install jumper on JP5 and a jumper across JP4.2 and J.6.1
(On rev X of the PCB JP4.2 should be bent slightly. This will be
fixed on the new revision)
For programming mode:
(need to ask Philip) JP4,JP5,J6:
JP5: INSTALLED
JP5, J6: TBD