Themis NanoPAK, Руководство пользователя

Страница: 24 / 156

1-2
Themis Computer
NanoPAK
®
User Manual Version 1.0
1.2 System Description
The NanoPAK
®
is a self-contained SBC module containing a carrier board and a
CPU mezzanine card using the industry standard COMExpress
®
form factor and
Type 1 pin assignments. The CPU mezzanine card is mounted on the carrier board,
which interfaces the processor module with the 69-pin external connector and pro-
vides support including additional I/O, buffering, FLASH, etc. The IO logic on the
carrier board includes an HD Audio port provided by an ALC889 codec, two native
serial ports, and a Solid-State Disk drive attached to one of the three SATA ports of
the SBC, which can serve as a boot device for the system. The CPU mezzanine card
uses one of the processors listed in
Figure 1-2 . For connectivity to I/O devices, the
CPU will be paired with a PCH as listed in Figure 1-2 . The BIOS is contained in a
flash device connected to the PCH over the SPI interface. All power, control, man-
agement, and I/O signals go through the external 69-pin connector.
The system is described by its complete Part Number, as in the following example,
according to the description in
Figure 1-2, NanoPAK Ordering Information , on page
1-3. For instance, a system with a part number of TSY-215NP-322-NNANVN has
components as follows, (the part number may often be shortened, as in TSY-215NP):
TSY- 2 xx NP-xxx-XXXXXX
TSY- 2 15 NP-322-NNANVN
215 = AMD Fusion - T56N CPU / A55E
3 = 64GB flash on SBC Module
2 = 32GB flash on Carrier Board
2 = 2GB RAM on SBC Module
N = Line In (Audio Input Option)
N = Internal Removable Battery Holder
A = RS232 Serial Port TTYA Option
N = Non-sealed connectors
V = SATA 2GPI/2GPO
N= DDC for VGA interface (I
2
C Bus Option)
Complete Part Number descriptions are given in Figure 1-2 . These represent the
standard configurations. Please consult the factory for other configurations.