10/2021 V 1.1
VIEW 11
05/23
To centre the panel, add 1mm Packers
on both sides of Return Panel in the
Underframe.
Apply the Rigid Seal to the dry side of
the Wall Profile star�ng from the
archway of the Wall Profile up to the
top.
Remove the Panel, Wall Profile So�
Seal, and the Wall Profile.
Trim the Wall Profile.
Use a fine file to remove any burrs. Be
careful not to damage the channel
finish.
Re drill the screws in to the Wall Profile
and remove a�er drilling.
Reinstall the Wall Profile and Wall
Profile So� Seal.
If the Glass is s�ll in place, remove it.
Add silicone in the corner where the
Wall profile Meets the Underframe at
the back.
Re-install the Glass.
Silicone the
inside corner
17
18
19
20
Flush
Rigid Seal
Glass Panel
