10/2021 V 1.1
VIEW 11
Flush
Rigid Seal
Glass Panel
6mm min
Wall Profile
Glass Panel
=
=
09/20
Measure and check the distance from
the Inline Panel to the Return Panel at
the bo�om and at the top are equal.
Ensure there is adequate glass in the
Wall Profile. (6mm is minimum)
Apply the Rigid Seal to the dry side of
the Wall Profile star�ng from the
archway of the Wall Profile up to the
top.
Gently tap the Wall Profile Rigid Seal
into place using a rubber mallet with
the Nylon Block to protect the Glass
and the Wall Profile.
33
34
35
36
