Outside of
enclosure
10/2021 V 1.1
VIEW 11
Cover Plate
Clamping
Plate
x
18/23
Measure the distance between the
edges of the Inline Panels.
Mark and cut the Underframe Top.
Snap the Underframe Top on to the
Underframe.
Feed the Underframe Wedge Gasket
into the archway gap of the Return
Panel and trace along the Glass on both
sides.
Trim the Wedge Gasket where it meets
the Underframe Top.
A�ach the Glass to Glass Hinges in the
direc�on your door will open and
�ghten to the Inline Panel.
Evenly �ghten the screws un�l the
Gaskets are just “nipping” the Glass.
Tighten all the screws to 15.6N.
Check the orienta�on of the Cover
Plates. Adjust Clamping Plate to Suit.
DO NOT fit the Cover Plates yet.
39
40
41
42
