IOM CRUZcontrol® Generation2 for NBC
P/N: 1118211
Revision Date: 05/31/2019
Page
51
of
66
Example 6: Creating a work zone
Creating a work zone
Problem
Creating a work zone in the middle of a section of CRUZcontrol
Solution
Use the release function module and interrupt the downstream logic to start
accumulation.
Configuration
When using TB1 to interrupt the logic set jumper terminal JP3, 2-3
When using TB4 to interrupt the logic set jumper terminal JP4, 2-3
User Action:
Apply a high signal to TB1 (24Vdc/120Vac) or TB4 (24Vdc)
Operation
All product stops at a specific accumulation zone, when the contact is closed and
is released when the contact is opened.
Figure 20: Work Zone
Figure 21: Work Zone Using TB1
Figure 22: Work Zone Using TB4
