Teyme EOLO-GTE10, Инструкция по эксплуатации

Страница: 15 / 52

15
4. Description
4.2.4. Suction Filter
Next to the suction valve there is the suction filter with an inox grid of 50 mesh. They
have an automatic closing valve for filter cleaning, auxiliary suction entry to fill in the
tank and cap for valve’s activation.
4.2.5. Pumps
4.2.5.1. High Pressure Piston Pumps
High pressure toughly-built-up pumps.
Immersed pistons with ceramic cases. Parts
with contact with fluid are manufactured in
anodized aluminium.
4.2.5.2. High Pressure Diaphragm Pumps
High pressure toughly-built-up pumps. They
include pressure accumulator and safety
valve. NBR diaphragms, parts with contact
with the liquid manufactured in anodized
aluminium and AISI 303/304.
4.2.6. Pressure Collector
Manufactured in brass it is placed in the front
part of the machine next to the pump. From
this collector it is possible to activate the
agitation (two euromix and one botmix), the
powder mixer and the inside rinsing of the
tank. In some models the pump has enough
exits available so that the collector is not
needed.
4.2.7. Pressure F ilter
It is placed on the exit of the pump or placed in the middle of the distributor, with an
inox grid VITON watertight o’ring sealed in the cap. Highest working pressure 50 bar.
All the filters must be on perfect conditions and regularly cleaned. Beware for a proper
combination of filter and grid mesh size. The grid mesh size must be always lower to
the average total flow rate of the nozzles.
4.2.8. Stirrers
In the front part and at every side of the inside of
the tank two trumpet-sized stirrers of 2 ways
(Euromix) and 3 ways (Intermix) can be found
depending on the capacity of the tank. These two
stirrers are activated by means of two of the valves
of the pressure collector and each include one or
two return channels. In the left low side of the tank
a one-way stirrer (botmix) is included, which stirs
the bottom of the tank. It is activated by means of
a pressure collector valve. In the inner lodge they
include a restrictor.
Model of pump
Flow rate
(l/min)
Highest
pressure
(bar)
Nº
pistons
GAMMA 125 PUMP 122,5 60 4
YA 130 PUMP 91,5 50 6
YA 150 PUMP 113 50 6
Model of pump
Flow rate
(l/min)
Highest
pressure
(bar)
Nº
diaphragms
APS 121S PUMP 115 50 3
APS 166 PUMP 163 50 5
APS-96 PUMP 88 50 4
BHA-200 PUMP 193,7 50 4
IDS 2001 PUMP 182 50 4
IDS 2200 PUMP 208 50 6
TEYME AR 150
PUMP
142,6 50 4
IDS-1701 PUMP 161 50 4