9
IV. MACHINE SET-UP
A.
Setup for Product Procedure
1)
Unlock handle under infeed conveyor, adjust conveyor to accommodate package width and then
re-lock the handle. The product should sit against the back rail of the infeed conveyor and
should transfer onto the main conveyor without any over hang.
2) Adjust
auxiliary
infeed conveyor to align with infeed conveyor (if Auxiliary Infeed Conveyor
option is installed) e.g.: Texwrap FC10 Flighted Conveyor.
3)
Using the seal height adjustment crank (labeled “A”) set seal height to approximately half the
height of the product above the conveyor surface. Use the top of the sideseal backup roller as a
reference. See diagram below.
ADJUSTMENT OF THE CRANK HANDLES “A” AND “B”
ON ALL TEXWRAP SIDE SEAL MACHINES
CRANK “A” ADJUST THE UP/DOWN CENTERLINE OF THE CROSS SEAL AND SIDE SEAL.
CRANK “B” ADJUST THE DISTANCE BETWEEN THE UPPER AND LOWER SEALBARS, OR
THE OPENING HEIGHT.
When adjusting either crank handle, do so with the air pressure on and keep the lower seal pad
even with the top of the conveyors. If you adjust Crank “A”, monitor the relationship of the lower pad
to the conveyors, adjusting Crank “B” as needed. This also applies to the adjustment of Crank “’B”. As
you adjust, you may have to adjust Crank “A” also in order to keep the lower pad even with the top of
the conveyors. If this is not done, it is possible to run the lower pad down far enough to bind it into the
lower conveyor mounting brackets. You could also run the upper bar into the top mounting brackets.
When this happens, the cranks become difficult to turn and could result in serious damage to machine
components.
Center of Product
Side Seal Backup Roller (Orange)
Mid Conveyor
Infeed Conveyor
Product
Side Seal Unit
Auxiliary Infeed Conveyor
Adjust Infeed Conveyor in this Direction
Back Rail
Locking Handle
Under Conv.
Содержание 2200SS SIDE SEAL
