TEXWRAP 2200SS SIDE SEAL, Руководство пользователя

Страница: 13 / 72

13
V. SPECIAL FEATURES
A. Using Test Mode
This feature is designed to see how fast the machine will run a simulated product for estimation
purposes. The machine will simulate a package of a certain length and height as if there were an actual
physical product. This allows the user to establish a production rate of a particular product. Adjustment
of the input values and the endseal crank adjustments should be made for the simulated package. To get
to the “Test Mode” screen, press the “NEXT” button on the home panel. Next, press the “TEST
MODE” button. Three settings will be displayed: product length, spacing between products, and endseal
lag distance. Once these are set to the desired values, press the “TEST MODE ON/OFF” button,
(remembering to remove the film first). The main speed should be set to the lowest setting and gradually
increase to the maximum achievable for that product. Once the speed is set, allow the “Product Per
Minute Counter” a few minutes to settle and then an accurate count can be achieved. To stop the
machine from continuing the cycle, press the “TEST MODE ON/OFF” button. The machine will stop
and wait for the next user action. With Auto mode off (Green Button), press Test Mode on. Go to
maximize package per minute. Press Go To Max-Speed button. Press to begin the Maximize Speed
Function. Go back to home screen for PPM count and final suggested Maximum Belt Speed.
B. Auto Space Feature
This method of staging eliminates the need in many cases for a separate staging system (such as a
flighted conveyor). By setting a distance between packages, the Auto Space feature will automatically
keep that distance between products. To start Auto Space, press the “MACHINE SET-UP” button on
the home panel. Press the “AUTOSPACE” button. This will ask for a length in inches, enter in the
desired distance between products. Next press the “AUTOSPACE ON/OFF” button. The Auto Space
feature is now on. It will stay on until the buttons are pressed again.
To optimize the autospace feature
turn infeed percent to 10
C. Film Registration
Now available. Please call Texwrap technical support for further instructions at 1-800-886-7421.