Textron Bell 206L3, Руководство по обслуживанию

Страница: 187 / 230

BHT-206L3-MM-1
5-00-00
7 JUN 2013 Rev. 21 Page 155 Export Classification C, ECCN EAR99
CONDITIONAL INSPECTIONS
5-53. HARD LANDING
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: ____________ _________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _________________________
HARD LANDING
A hard landing is defined as any incident in which the impact of
the helicopter with the ground causes severe pitching of the
main rotor. Blades involved in this type of hard landing must be
thoroughly inspected visually. If no obvious damage is
discovered, the blades may be retained in service for continued
usage.
If, on a hard landing, either main rotor blade comes into contact
with the ground, tailboom, or other foreign object, both main
rotor blades are to be regarded as having been involved in a
Sudden Stoppage and must be returned to a Bell Helicopter
Textron approved blade repair station for inspection.
The airframe landing skids and crosstubes will deform and yield
under load forces in excess of 2.5 G's. if the cabin fuselage
contacts the ground, the G forces in the fuselage increase
abruptly. If, following a hard landing, the cabin fuselage is
resting on the ground or shows evidence of having touched the
ground, it is considered to have sustained a 10 G load.
If on a hard landing shear pin in elevator control tube
(206-001-098) is sheared, eyebolt (206-001-902) that retains
elevator control tube (206-601-898) to torque tube
(206-801-386) must be replaced as well as elevator control tube
(206-001-098).