Textron Bell 206L3, Руководство по обслуживанию

Страница: 135 / 230

BHT-206L3-MM-1
5-00-00
25 FEB 2011 Rev. 16 Page 103 ECCN EAR99
SCHEDULED INSPECTIONS
5-31. 1200-HOUR INSPECTION
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _________________________
NOTE
This inspection must be accomplished every
1200 flight hours.
Chapter 67 CYCLIC CONTROL STICK
Chapter 67 1. Open right crew door to gain access to pilot cyclic control
stick. Remove cyclic control stick.
BHT-206L-CR&O 2. Clean lower 4 inches of removed cyclic stick tube and
inspect.
3. Visually inspect cyclic stick tube for cracks using a 3X
magnifying glass. Pay particular attention to the area adjacent
to the two slots in the tube where two bolts secure the tube
when installed in the pivot lever assembly.
BHT-206L-CR&O
BHT-ALL-SPM 4. If a crack is suspected, remove paint and thoroughly
inspect lower end of the cyclic stick tube for cracking using the
fluorescent penetrant method.
5. If a crack is found, replace the cyclic stick tube with a
serviceable tube.