Texecom Premier Elite 48-W, Быстрый старт

Страница: 4 / 20

Premier 48-W Quick Start Guide
4 INS531
2. System Overview
System Architecture
Control Panel Features
Premier 48-W
•
32 wireless device Ricochet™ enabled receiver onboard
•
Expandable to 48 zones via keypads and zone expanders
•
1 x 4-wire data network (standard 7/0.2 alarm cable)
•
Up to 4 keypads and 3 zone expanders
•
Up to 2 output modules
•
4 independent areas each with 3 part arms
•
4 area arm suites
•
25 programmable User codes
•
500 Event Log (time & date stamped)
•
2 programmable panel outputs (2 x 500mA )
•
1.0 Amp power supply
•
32 Event Alarm Log
•
500 Event Mandatory Log
•
8 programmable digicom outputs (100mA each)
•
32 character zone text
•
Facility for Plug-on Digimodem ( Com300/2400/ )
•
Facility for Plug-on Paknet RP9 Radio-Pad
•
Facility for Plug-on GSM Module
•
Facility for Plug-on IP Module (ComIP/Chiron/WebWayOne/Emizon)
or any supported device
•
PC-Com /printer port
Power Supply Ratings
System Standby Times 7 Ah Standby Battery
Grade 2 Max Power
Available from
control panel
Grade 2 –
Rating
12 Hours 600mA 580mA
The “Rated Power” of the control panel will depend on the size of the
standby battery, standby time and the installation grade:
When calculating the current consumption of the system you must
include the current taken by the control panel and all the devices that
it powers. If the total current exceeds the “Rated Output” for the
grade you are installing to then an additional power supply is
required.
Connecting AC Mains
The AC Mains supply is connected to a 3 way ‘Euro Type’ fused
terminal block, which is fitted with a 125mA fuse.

All other wiring MUST be carried out before AC mains is
connected to the control panel.
After connecting the AC Mains, fit the mains cover, this can be
found in the spares bag.
L
E
N
To transformer
8 P rogrammable
100mA Outputs
Bell Tamper Input
Auxiliary Tamper Input
2 P rogrammable
A ) (2 x 500m
Outputs
P remier
48-W
P remier LC D/LC DP
4 Wire Data Network 1
16 Programmable
100mA Outputs
4 K eypads
P remier OP 16
2 Output Modules
Alarm R eceiving
C entre
Modem
PC and Modem for
Remote Upload/Download
PC /USB -C om
PC and for
Local Upload/Download
PC/USB -C om
Plug on Digimodem
Plug on
(Com300 or C om2400)
Radio-Pad,
GSM Module
2 Zone
Inputs
1Programmable
100mA Output
2 Zone
Inputs
1Programmable
100mA Output
S peaker
Output
S peaker Output
8 Zone Inputs
Auxiliary Input
P remier 8XP
8 P rogrammable
100mA Outputs
3 E xpanders 0 to 48 Zones
32 Wireles s Device s lots
Power
Info.
Ready
Service
Omi
Power
Info.
Ready
Service
Omit
Bell/S trobe Outputs
Area Yes
Part
Chime
Omit Reset
Menu
2
abc
No
1 3
def
6
mno
9
wxyz
5
jkl
8
tuv
0
4
ghi
7
pqrs
Area Yes
Part
Chime
Omit Reset
Menu
2
abc
No
1 3
def
6
mno
9
wxyz
5
jkl
8
tuv
0
4
ghi
7
pqrs
Premier 32 Devic e
Wireles s R eceiver
S peaker Output