Texecom Premier Elite 48-W, Быстрый старт

Страница: 15 / 20

Premier 48-W Quick Start Guide
INS531 15
7. Other Hardwired Devices
Zone Expanders
The Premier 48-W can use hardwired expanders in addition to the
onboard wireless. When using the
Premier 8XP
or the
PSU200XP
the address of the first additional expander used should be set to 2
or higher.
Expander zones are preset depending on the network address
assigned, it is therefore crucial that consideration is given when
mapping wireless zones, or zones being used on keypads.

The onboard wireless expander occupies address 1.
Details are given for the available zones in the associated product
manuals. Care should be taken to make sure hardwired zones on
expanders are used correctly and any wireless devices or keypad
zones are NOT using the zone numbers associated with the
expander address.
The table below details which zones are fixed for each expander
network address. These cannot be changed and must be used.
Radio devices and Keypad circuits can be mapped to ANY zone.
Address
Zones
2 17 - 24
3 25 - 32
4 33 - 40
Premier COM300/COM2400
Carefully lift the control panel PCB and fix the COM unit into the
space provided with the connection lead attached.
The red lead should be positioned on the uppermost pin of the
COM unit.
The control panel end of the connector should be attached with the
red lead on the left most pin of the digi modem connector.
Programming requirements for the COM unit can be found in the
Premier 48 installation manual INS176.
A
ud
io
C
om
1
A
ud
io
C
om
1