manualshive.com logo in svg

Texas Microsystems P5000HX Series, Руководство пользователя

Поделиться
Скачать
Texas Microsystems P5000HX Series Скачать руководство пользователя страница 38

7 Steps to P5000HX Operation

38

Model P5000HX Series CPU User’s Manual

Step 7 (cont.) - Run the Setup Utility (Basic Options - cont.)

Overview

The remainder of the Basic Options Menu is described below.

Shadow RAM

When you select this option, a memory map that displays
memory in 16 KByte blocks is displayed. If a ROM is found
within that 16 KByte location, the Setup Utility will display:

•

ROM - the system will execute code directly from
the ROM device,

•

SHADOW - the system will copy the code from
the ROM device into DRAM at the same address,
allowing code to run from the DRAM (dramati-
cally improving system performance), or

A window displays the starting address, length, and status for
each option ROM.

Boot Options

The first menu allows you to set the NumLock key status at
boot. If a 101-key keyboard is attached, this option directs the
BIOS to enable/disable the NumLock key before booting. The
second menu allows you to set the boot drive sequence. The
third allows for a “quiet boot” (a banner will be displayed,
rather than power-up diagnostics).

Password Options

This feature allows you to enable and enter a password for
Setup Utility access or for Setup and boot access. The pass-
word may consist of from one to 12 characters. Letters A to Z
(case-sensitive) and numbers 0 to 9 are accepted.

Advanced
Options and PCI
Options

Note the “Advanced Options” and “PCI Options” items.
Choosing these items will cause new menus of options to be
displayed. We’ll discuss these menus beginning on page 40.

Содержание P5000HX Series











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды