manualshive.com logo in svg

Texas Microsystems P5000HX Series, Руководство пользователя

Поделиться
Скачать
Texas Microsystems P5000HX Series Скачать руководство пользователя страница 36

7 Steps to P5000HX Operation

36

Model P5000HX Series CPU User’s Manual

Step 7 (cont.) - Run the Setup Utility (Basic Options)

Overview

The Basic Options Menu provides the following options.

Time and Date

This option allows you to set the time and date in the battery-
backed clock/calendar.

Floppy Disks

This option allows you to configure the P5000HX to operate
the floppy drive subsystem.

Fixed Disks

This option provides menus that allow configuration of the
P5000HX fixed disk subsystem.

Note: The “Large Disk DOS Compatible” option should be
enabled when you are running DOS-based operating systems.
This option enables BIOS translation for drives greater than
528 MB.

Keyboard

These three menus allow you to set these external keyboard
“Typematic” options:

•

sound (if enabled, the system speaker will “click”
as you press keys on the external keyboard),

•

delay (the period that elapses between the time a
key is held down until it begins to repeat), and

•

rate (the rate at which a character will repeat).
Note: The “Keyboard Typematic Rate” menu will
display only three optional settings simulta-
neously. Continue to scroll through the settings to
view all available options.

Next...

Turn to page 38 for the remaining Basic Options Menu
settings.

Содержание P5000HX Series











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды