6 Getting Started with TI InterActive!
TII_GettingStarted.doc Getting Started with TI InterActive! Karen Davis Revised: 6/15/04 2:00 PM Printed: 6/15/04 3:39 PM Page 6 of 63
For more information regarding TI products and support:
•
Visit the TI Education home page: education.ti.com
•
Or search the TI-Cares™ KnowledgeBase and submit e-mail
inquiries: education.ti.com/support
•
Or call toll-free: (800) TI-CARES (800) 842-2737
To install TI InterActive!:
1. Close all open programs.
2. Insert the TI InterActive! CD in your CD-ROM drive.
3. If the installer does not start automatically, click the
Windows Start button, and then click Run. Type
D:\setup.exe
,
and then press Enter. (Substitute the letter of
your CD-ROM drive if it is not D.)
4. Follow the displayed instructions. When the installer has
completed, it returns you to the Windows desktop. You may
need to restart the computer before using TI InterActive!.
Microsoft .NET Framework is installed automatically on
computers that don’t already have it.
After downloading the executable file, either:
•
Double-click the file.
– or –
•
Click Start
Run and then type the file’s path name.
If your computer does not have Microsoft .NET Framework, you
can download Microsoft .NET Framework 1.1 or later from the
Microsoft Web site (windowsupdate.microsoft.com).
You can keep your Windows operating system up-to-date by
downloading updates from Microsoft.
1. Make sure your computer has access to the Internet.
2. Use your Web browser to go to the Windows Update Web site
(windowsupdate.microsoft.com).
Installing from a
CD-ROM
TIP
: If you currently
have Display set for
Large Fonts, change to
Small Fonts before
rebooting.
Installing from a
download from
the Web
NOTE:
If you run
TI InterActive! before
installing Microsoft .NET
Framework, any
TI InterActive! operation
that requires the .NET
Framework will display
an error message when
you try to use it.