Getting Started with TI InterActive! 35
TII_GettingStarted.doc Getting Started with TI InterActive! Karen Davis Revised: 6/15/04 2:00 PM Printed: 6/15/04 3:39 PM Page 35 of 63
6. Click the List Editor’s Close button
. The list is inserted
into the document.
L1
L2
30 600
40 550
50 700
60 875
70 1050
1. With the cursor positioned at the end of the list, press Enter
to create a new line.
2. On the TI InterActive! toolbar, locate the Graph button
and
click the down arrow
next to it. A group of buttons is
displayed, representing the available graph types.
3. Click the Scatter Plot button
. The Functions editor is
displayed along with a Graph window.
4. Make sure that the Stat Plots tab is selected.
5. In the uppermost text box, type
L1
to specify it as the list
containing the x coordinates.
6. Press the Tab key to move to the second text box, and type
L2
to
specify it as the list containing the y coordinates.
7. If it is not already checked, click the check box at the left to
select this plot. TI InterActive! plots the data points in the
Graph window. The points are not visible because they are
outside the default viewing boundaries of the Graph window.
Plotting the glide
performance
