Texas Instruments MSP430FG47x Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 93

background image

PACKAGE OPTION ADDENDUM

www.ti.com

28-Apr-2015

Addendum-Page 2

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)

(3)

MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

(4)

There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5)

Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation

of the previous line and the two combined represent the entire Device Marking for that device.

(6)

Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish

value exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

«
...
86
87
88
89
90
...
»

Содержание MSP430FG47x






























































































Отзывы:

Нет отзывов

Похожие инструкции для MSP430FG47x

SIGMA CONTROL 2

Бренд: KAESER KOMPRESSOREN Страницы: 246

CompactRIO cRIO-9002

Бренд: National Instruments Страницы: 21

Бренд: National Instruments Страницы: 145

Бренд: National Instruments Страницы: 42

Бренд: National Instruments Страницы: 8

Бренд: YASKAWA Страницы: 49

Бренд: M-system Страницы: 17

Бренд: Ultraflex Страницы: 7

Бренд: Daihan Scientific Страницы: 11

Бренд: NXP Semiconductors Страницы: 39

Бренд: Siro Страницы: 2

Бренд: Genius Страницы: 52

Бренд: Advanced Control Technologies Страницы: 3

Hydromat DP DN 20

Бренд: oventrop Страницы: 40

New Focus Picomotor 8742

Бренд: Newport Страницы: 102

SWISS QUANTUM+ Time Controller Series

Бренд: Id Quantique Страницы: 92

Scalar Distributed Library Controller 2.7

Бренд: Quantum Страницы: 324

MAXinBOX FANCOIL 2CH2P

Бренд: Zennio Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды