Texas Instruments ADS42JB46 Скачать руководство пользователя страница 1

Страница: 1 / 24

SLAU467D – November 2012 – Revised February 2017

Submit Documentation Feedback

ADS42JB46, ADS42JB49, and ADS42JB69 Evaluation Module

User's Guide

SLAU467D – November 2012 – Revised February 2017

ADS42JB46, ADS42JB49, and ADS42JB69 Evaluation

Module

This document outlines the basic steps and functions that are required to ensure the proper operation of
the Texas Instruments (TI) ADS42JB46, ADS42JB49, and ADS42JB69 Evaluation Modules (hereafter in
this document, ADS42JBxxEVM or EVM). The EVM package includes an ADS42JBxxEVM, a 5-VDC
power supply, and a mini-USB cable. This EVM is designed to be used with the TSW14J5xEVM (a
JESD204B data capture card). The ADS42JBxx EVM can also be connected to all FPGA development
platforms with an FMC connector for evaluation. The ADS42JBxxEVM includes either an ADS42JB49 (14-
bit), or ADS42JB69 (16-bit) dual-channel, 250-MSPS, or an ADS42JB46 (14-bit) dual channel, 160-MSPS
analog-to-digital converter. The EVM also includes a TI LMK04828 clock jitter cleaner to provide a low
jitter/phase noise sampling clock to the ADC. This user's guide outlines the steps to quickly evaluate the
performance of the ADS42JBxx ADC by capturing and displaying signal waveforms using the
TSW14J5xEVM and the High Speed Data Converter Pro GUI software. The EVM schematics, BOMs, and
layout files are found in the design package under the ADS42JBxxEVM product folder available on

http://www.ti.com

spacer

Contents

Introduction

...................................................................................................................

1.1

Overview

.............................................................................................................

1.2

Block Diagram

.......................................................................................................

Software Control

.............................................................................................................

2.1

Installation Instructions for ADS42JBxxEVM GUI

..............................................................

2.2

Quick Start

...........................................................................................................

Software Operation

..........................................................................................................

3.1

Top Level GUI Controls

............................................................................................

3.2

ADC Controls

......................................................................................................

3.3

LMK Controls

......................................................................................................

3.4

Low Level View

....................................................................................................

List of Figures

Block Diagram of the ADS42JBxxEVM

...................................................................................

EVM Hardware Setup

.......................................................................................................

ADS42JBxx EVM GUI Setup

...............................................................................................

HSDC Pro Software Setup

.................................................................................................

ADC Data Capture, 25 MHz Sinusoid, 250 MSPS Sampling Rate

...................................................

Top-Level Block Diagram Window of the ADS42JBxx GUI

............................................................

ADC Controls Window of the ADS42JBxx GUI

........................................................................

LMK04828 Outputs Control Window of the ADS42JBxx GUI

........................................................

LMK04828 PLL2 Controls

.................................................................................................

LMK04828 SYSREF and SYNC Settings

...............................................................................

LMK04828 Output Clock Settings

........................................................................................

Low Level View

.............................................................................................................

Содержание ADS42JB46

























Результаты поиска

Содержание ADS42JB46

Отзывы:

Похожие инструкции для ADS42JB46

Бренды по названию

Популярные бренды

Texas Instruments ADS42JB46, Руководство пользователя

Результаты поиска

Содержание ADS42JB46

Отзывы:

Похожие инструкции для ADS42JB46

Бренды по названию

Популярные бренды