![background image](http://html1.mh-extra.com/html/teufel/kb-62-cr/kb-62-cr_technical-description-and-user-manual_1093060016.webp)
16
• KB 62 CR
NOTICE
Make sure the polarity is correct!
Otherwise, the sound quality
will suffer.
– Connect the like-coloured
terminals.
– The strands of the speaker
cables are marked with differ-
ent colours or shapes.
1. Split the single wire down to
approximately 30 mm and remove
about 10 mm of the insulation on
each strand. Twist the single wire so
that no strands are protruding. Tin
coating is not necessary.
2. Turn the connector terminal
(23)
counterclockwise until loose.
3. Run the stripped cable end into the
now visible hole.
4. Close the terminal by turning it
counter-clockwise.
The cable has now been clamped in
place.
– You can also connect the speakers
with pin plugs. For this, pull off
the rubber caps on the connector
terminals.
Subwoofer
You can connect an active subwoofer
to the SUB jack
(28)
with an RCA
cable.
28
REC OUT
The unregulated stereo
audio signal is available
at the jacks REC
(27)
. You
can connect an analogue
recording device to it or
even supply a second room
with sound using active speakers or a
wireless transmission system. You will
need a stereo cable with RCA plugs to
do so.
Headphones
With the KB 62 CR, you can connect
stereo headphones to two jacks:
• Jack
(7)
on the front side for 3.5
mm jack plugs
• PHONES jack
(21)
on the back for
3.5 mm jack plugs
7
21
27
Содержание KB 62 CR
Страница 43: ...43 KB 62 CR...