Tetra Pak HOYER COMET C, Руководство пользователя

Страница: 40 / 150

CC901AF 6-6
Tetra Pak
Hoyer
Fig. 6.3
2
1
n. Place a suitable container under the bypass
valve drain.
o. Place a suitable container under the doser
discharge chute.
p. Start feeding ice cream from the freezer.
q. Wait until the ice cream coming from the
bypass is of the required consistency.
r. Position the bypass valves to feed the dosers
by pressing button A2 (Fig. 6.2).
s. Wait until the ice cream coming from the
bypass is of the required consistency.
t. Press the run and doser start-up buttons (Fig.
6.2). The lamellas will start moving in
synchrony with the dosing when ice cream
consistency and volume are correct.
Press the automatic production start button
(Fig. 6.2). The machine will start the production
cycle automatically.
If the manual production cycle is selected, start
each individual station with the relevant station
enable buttons.
6.2.1 Emergency stop
If any component malfunctions, press the
emergency stop button (Part. 1/2, Fig. 6.3) to
disable all the machine’s electrical functions.
To reset the machine, first remedy the cause of
the malfunction, rotate the emergency stop button
(Part. 1, Fig. 6.3) anticlockwise and release
it, then press the reset button (Fig. 6.2) on
the operator interface panel or press the button
on the cord emergency stop switch (Part. 2, Fig.
6.3) and then press the reset button (Fig.
6.2).