manualshive.com logo in svg

Tetra Pak HOYER COMET C, Руководство пользователя

Поделиться
Скачать
Tetra Pak HOYER COMET C Скачать руководство пользователя страница 15

CC901AD

4-2

Tetra Pak

Hoyer

Fig.4.1

2

2

1

1

2

The HOYER COMET C machine and the various
operating stations are transported in special con-
tainers, generally wooden crates. Unpacking must
be done near to the final installation position of
the machine. The crates can be easily transported
by a lift truck.
When the crate has been positioned correctly,
unpack as follows:
a. Unnail the lid and remove it. Do the same

thing with the side panels. Pay particular
attention to the wooden spacer blocks located
between the sides of the crate.

b. Remove the spare parts box and other com-

ponents from the crate.

c. Unnail the wooden blocks that hold the ma-

chine in place during transport and remove
the cellophane sheet.

d. Check that the contents of the crate corre-

spond to the description given in the shipping
documents.

e. Check that all the covers and panels have

been correctly fitted and that there are no
loose parts.

f. Visually inspect all the electrical components

to make sure that they are not damaged.

g. If any part/component is missing, stop un-

packing and immediately notify Tetra Pak
Hoyer.

h. If the machine has been damaged during

transit, notify the insurance company
immediately. Do not proceed beyond
unpacking until you are authorised to do so
by the insurance company.

4.1 Unpacking and delivery checks

4.2 Transport and installation

The following measures must be adopted during
the installation of the machine:
a. Position the machine at the place of

production. Move the machine using a fork
lift truck of suitable capacity (Part.1 Fig.4.1
fork positions), checking that there is
sufficient space to remove the guards and

allow ease of access to the internal machine
parts.

b. Adjust the feet (Part.2 Fig.4.1) until the ma-

chine is perfectly level both longitudinally
and transversally.

Содержание HOYER COMET C























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды