Tetra Pak HOYER COMET C, Руководство пользователя

Страница: 31 / 150

CC901AE 5-14
Tetra Pak
Hoyer
Fig. 5.11
1
1
3
3
2
Fig. 5.10
1
1
3
3
2
5.3.9 Cup lid closing station adjustment
5.3.8 Cone lid closing station adjustment
Check that the lid pressing plate (Part. 1, Fig.
5.11) compresses the lid in the cup in such a way
that it closes off the cup perfectly. If the closure
is not correct, lower the plate by rotating it
clockwise after having slackened the lock nut
fixing it to the cylinder stem (Part. 3, Fig. 5.11). If the closure is too accentuated, rotate the plate
(Part. 1, Fig. 5.11) anticlockwise until the correct
closure is obtained.
On completion of the adjustment, remember to
tighten the plate lock nut .
Check that the crimper (Part. 1, Fig. 5.10) rests
on the outside of the slot (Part. 2, Fig. 5.10) and
compresses inside of it in order to close off the
cone perfectly.
If the cone is not closed off correctly, lower the
crimper (Part. 1, Fig. 5.10) by rotating it
clockwise after having slackened the nut anchoring it to the cylinder stem (Part. 3, Fig.
5.10).
If the closure is too accentuated, rotate the
crimper (Part. 1, Fig. 5.10) anticlockwise until
the correct type of closure is obtained.
On completion of the adjustment, remember to
tighten the crimper lock nut.