TESTO 6383, Инструкция по эксплуатации

Страница: 44 / 88

4 Transmitter
44
Editing display settings
You can set the brightness and contrast of the display.
1.
Select Display Settings with  or  and confirm selection with
SET .
2. Select Backlight or Contrast with  or  and confirm
selection with SET .
One of the following parameters can now be selected using

or
 , after which the selection must be confirmed with SET :
• Backlight
The display illumination is changed.
Edit/select parameter with
 or  , confirm with SET or cancel
entry with ESC (the effect of the change in parameter can be
seen during input).
• Contrast
The brightness difference between the display background and
the displayed values is changed.
Edit/select parameter with
 or  , confirm with SET or cancel
entry with ESC (the effect of the change in parameter can be
seen during input).
• Backlight 24h on
Select On or Off using

or

and confirm with SET .
Off: The display light switches off automatically if no button was
pressed for 10 seconds.
On: The display light is activated
3. Return to Display Settings with ESC and use  or  to
continue to Language .
Selecting language
You can select the language for the plain text line in the display.
> Press
SET , select required language with

or

, confirm
selection with SET and return to Language .
Only choose a language that you can understand well.
Editing code settings
You can set the access code (password).
If a code other than "0000" (factory setting) is set, the
transmitter can only be operated once this code has been
entered via the menu.
1. Select Code with  or  and confirm selection with SET .
2. Scroll one digit to the right using

and increase value of digit
by 1 using  . Confirm with SET or abort entry with ESC .